Tilt Deck Equipment Hauler Tilt Deck Equipment Hauler Tilt Deck Equipment Hauler Split Tilt Equipment Hauler Split Tilt Equipment Hauler Tilt Deckover Equipment Hauler Split-Tilt Deckover Equipment Hauler Split-Tilt Deckover Equipment Hauler Deckover Landscape Trailer Deckover Equipment Hauler HD Deckover Equipment Hauler Heavy Duty Flatbed Trailer Low Profile Dump Trailer Heavy Duty Low Profile Dump Trailer Heavy Duty Low Profile Dump Trailer Deckover Dump Trailer 3-Way Dump Trailer Advantage Dump 5x8 Low Profile Advantage Dump Low Profile Advantage Dump HD Low Profile Pickup Bed Dump Insert Equipment Hauler Equipment Hauler Equipment Hauler Scout Utility Trailer Warrior Utility Trailer

Full Deck Tilt Trailer


 

Overview

Are you looking for a better solution to loading and unloading skid loaders, mini excavators, compact tractors or other types of equipment? Where traditional ramp trailers present a challenge with higher load angles and the inconvenience of ramps that have to be repositioned, the CAM Superline Full Deck Tilt Trailer eliminates the need for ramps with a gravity powered tilting deck.

Designed for easy loading, this trailer features a knife edge approach which creates a smooth and level entry point onto the deck. Dexter 4-inch drop axles ensure a lower deck height and low load angle of approximately 9 degrees. This lower load angle reduces incline and ensures easy and proper loading of equipment.

The tilting deck is mounted with a pivot point strategicaly located which allows it to tilt into the loading position via gravity. A hydraulic cushion cylinder provides variable adjustability of the gravity tilt operation. A hydraulic flow control valve with adjustment knob allows the user to control the speed at which the deck is tilted. Two foldable, locking heavy duty latches secure the deck for transportation.

The trailer is constructed with a heavy duty 6 inch angle steel main frame with 6 inch channel tongue. For convenience, a tool tray with locking lid is integrated into the tongue area. Fully gusseted diamond plate fenders provide extra rigidity to the trailer's frame. These Fenders will not fold or crush when stood on.

The CAM Superline full deck tilt trailer comes standard in 16 foot lengths with optional lengths up to 20 feet, the deck consists of inch and a half tight grained northern hemlock for long-lasting durability and enhanced resistance to weathering.

This trailer is built with a durable four-bolt adjustable hitch plate offering changeable settings, ranging from thirteen to eighteen inches, to match the hitch height of your tow vehicle. This model comes standard with a 2-5/16” self-seating ball coupler or an optional 2-1/2” pintle ring.

For ease of operation (and to save you time), our 7,000 lb. top-wind jack reduces cranking with a convenient drop-leg feature. Simply remove the pin, lift the jack leg, and clip the pin back into place. An innovative Zip trailer breakaway system eliminates fraying, dragging, or breaking. A sealed 7-pin RV plug, fully wired to a weatherproof junction-box, provides a fast and secure electrical connection to your tow vehicle.

Built for quality, value, and dependability, all CAM Superline trailers come standard with LED lights, a sealed, 1-piece heat-shrunk wiring harness, and a superior 2 component finish featuring an epoxy primer and PPG polyurethane paint providing the ultimate in corrosion resistance and long-lasting durability. Back it all up with a 2-year warranty and it's easy to see - CAM Superline is your partner for the long haul!

 

Specifications:

Back to Top

Model #

GVWR:

Empty Weight:

Payload:

Deck Length:

Overall Width:

Between the Fenders:

Deck Height:

Axle Capacity:

Radial Tire Size:

Main Frame:

Crossmembers:

Tongue:

5CAM16FTT

11,960 lbs.

2,980 lbs.

8,980 lbs.

18'

102"

81"

16"

5,080 lbs.

225/75R15LRD

6" x 4" x 5/16" Angle

3" Channel @ 4.1#

6" Channel @ 8.2#

6CAM18FTT

13,800 lbs.

3,080 lbs.

10,720 lbs.

18'

102"

81"

17"

6,000 lbs.

235/80R16LRE

6" x 4" x 5/16" Angle

3" Channel @ 4.1#

6" Channel @ 8.2#

7CAM18FTT

16,100 lbs.

3,280 lbs.

12,820 lbs.

18'

102"

81"

17"

7,000 lbs.

235/80R16LRE

6" x 4" x 3/8" Angle

3" Channel @ 4.1#

6" Channel @ 10.5#

8CAM18FTT

18,400 lbs.

3,990 lbs.

14,410 lbs.

18'

102"

81"

22"

8,000 lbs.

215/75R17.5LRH

6" x 4" x 1/2" Angle

3" Channel @ 4.1#

6" Channel @ 10.5#

 

Standard Features

Back to Top
  • Dexter E-Z Lube™ Axles
    4" Drop (5, 6, 7 Ton)
  • Dexter Oil Bath Straight Axle (8 Ton)
  • Nev-R-Adjust Brakes (N/A on 8 Ton)
  • Slipper Spring Suspension
  • Electric Brakes (2) Axles
  • Adjustable Hydraulic Cushion Cylinder
  • Diamond Plate Fenders
  • 7K Bolt-on Drop Leg Jack
    (12K on 8 Ton)

 

Options Available

Back to Top
  • 20' Deck Length
  • Spare Tire & Wheel
  • Spare Tire Mount
    Spare Wheel & Tire Mount
  • 12K Bolt-on Drop Leg Jack
    (Standard on 8 Ton)
  • Oak Deck (Standard on 8 Ton)
  • 3/16" Diamond Plate Decking
  • Power Up & Down
    (Dual 3" Cylinders)
    - Includes 12V Battery